AQUMARK, INC EMULSION MAKE DOWN SYSTEM. THE “UGLY” POLYMER FEEDER
AQUAMARK, INC Manufactures a polymer make down system that uses the flow of carrier water to activate the emulsion polymer. These systems are relatively simple and easy to clean. Polymer is injected into the system before three static mixers which provide the mechanical mixing that activates the polymer. These units come in two sizes. The small size uses a ¾ inch static mixer and has a flow rate of 0 to 5 gpm of carrier water and is capable of feeding up to 2.5gallons per hour of neat polymer. The large size uses a 1 inch static mixers and has a flow rate of 0 to 10 gpm of carrier water is capable of feeding up to 5 gph of neat polymer. Lower viscosity emulsion polymers can be fed at higher rates.
To install the unit all that is needed is a garden hose 1/2 inch for the small unit and a 3/4 inch hose for the large unit which is attached to the lower left hand side of the unit. Made down polymer then comes out of the right hand valve which needs to be sent to the system using the polymer. Water can be clean effluent water or fresh city water for the units.
Pumps are ordered separately for these units depending upon how much polymer needs to be added to the system. We recommend and supply the high viscosity head LMI polymer make down pumps.
AQUAMARK, INC
P.O.
PHONE 440-564-1227
FAX 440-546-1255