AQUAMARK, INC.
AQUAMARK, INC. HAS MANY YEARS OF PROVIDING PRODUCTS AND SERVICE TO THE WASTE WATER TREATMENT INDUSTRY.
OUR RANGE OF PRODUCTS INCLUDES:
“UGLY”
EMULSION
POLYMER FEEDER
MANUFACTURED BY:
AQUAMARK, INC.
PO BOX 773
CHESTERLAND, OHIO 44026
PHONE: 440-564-1227
FAX: 440-564-1255
customerservice@aquamark.net
The “UGLY” emulsion polymer feeder was developed to meet a need in the market
place. The price for polymer feeders has skyrocketed over the last decade
and many of our customers were complaining about the cost of these feeders.
Our goal was to develop a feeder for under $2,500.00 that will feed any emulsion
polymer to satisfy this need.
Emulsion polymers need to be “made” down with fresh water to be useful.
This process involves mixing the polymer with water at specific rates.
This process also has to be done with enough mixing to adequately invert the
emulsion polymer completely.
The “UGLY” emulsion polymer feeder consists of three major components.
These components are:
1) ROTO meter to accurately control the amount of water that is being
used. Depending upon the model water flow range from 0 gpm to 10 gpm
2) Static mixers to thoroughly mix the polymer into the desired solution
strength.
3) LMI High Viscosity polymer pump to inject the emulsion polymer into the
water flow before the static mixers.
Two other goals were also satisfied by this unit.
a) This unit is very easy to clean. Occasionally the water gets shut
off to polymer units. This resultant water shut off allows for a very
thick polymer solution to get caught in the feeder. The “ UGLY” emulsion
feeder is easily taken apart and cleaned.
b) The “UGLY” feeder has no moving parts other than the high viscosity
polymer pump. This reduces or eliminates any down time due to mechanical
issues.
The unit is built with wood and finished with a durable aluminum covering.
The wood construction makes repairs very easy. It can either sit on the
floor or mount to a wall for easy application.
“UGLY” polymer feeder
To order the “UGLY” emulsion feeder contact your AQUAMARK sales representative or call:
phone: 440-564-1227
Fax: 440-564-1255
Or our email address is:
customerservice@aquamark.net